Agenda:
TUESDAY, JUNE 6, 2023
Approx. 3.00 pm CEST
Meeting Point hotel lobby NH Collection Sevilla
Technical Guided Tour at Satys
Approx. 6.00 pm CEST
Back in the hotel, Welcome at rooftop terrace
WEDNESDAY, JUNE 7, 2023
8.45 am CEST
Welcome and introduction to the conference
Jan Gesthuizen, IntAIRCOAT, DE
AUTOMATION
9.00 am CEST
The Robotic Coating Revolution
Scott Adams, Boeing, US
9.30 am CEST
Automated painting process for aircraft components
Sabine Mewis, Dürr, DE / Sabri Gökay Adali, Turkish Aerospace, TUR
10.00 am CEST
On-demand surface technologies for the aviation industry
Björn Speckmann, Fraunhofer IFAM, DE
10.30 am CEST
Coffee, Contacts and Exhibition
CORROSION
11.00 am CEST
E-coating based on a colloidal polyurethane anaphoretic paint as Cr-free corrosion protection for aircraft industry
Pedro Astola, Titania, ES / Amaya Garcia, Cidetec, ES
11.30 am CEST
Weathering & Corrosion Testing for the Aerospace Industry
Dr. Andreas Giehl, Q-Lab, DE
12.00 pm CEST
Lunch and Exhibition
1.15 pm CEST
Workshops: Participant discussion with moderator – Workshopchange after 25 min
Topics:
– Automation
– Chromate free coatings
– Repair and Maintenance
– Sustainability
SUSTAINABLE COATINGS I
2.30 pm CEST
Optimising for coatability: Navigating the challenges of green materials
Dr. Andrew Mellor, Krüss GmbH, DE
3.00 pm CEST
Paint Curing at Your Fingertips – Alexit SnapCure ClearCoat
Dr. Claudia Hoth, Mankiewicz, DE
3.30 pm CEST
Coffee, Contacts and Exhibition
MEASURING & TESTING
4.00 pm CEST
From automotive to aerospace: a successful story for contactless measurement of coating layer thickness
Francisco Leon, Airbus, ES / Israel Arnedo, das-nano, ES
4.30 pm CEST
Increasing sustainability through more efficient testing processes
Nico Mats Janßen, Optisense, DE
5.00 pm CEST
Coffee, Contacts and Exhibition
5.30 pm CEST
End of day 1
Approx. 6.00 pm CEST
Meeting Point hotel lobby NH Collection Sevilla
We take shuttle busses to the location of the evening event.
6.30 pm CEST
Start of Networking Night
La Quinta Braseria
THURSDAY, JUNE 8, 2023
8.30 am CEST
Presentation of discussion results
Jeremy Bradley, Airbus Operations, GB
Dr. Jill E. Seebergh, The Boeing Company, US
Dr. Volkmar Stenzel, Fraunhofer Institute of Manufacturing Technology and Applied Materials, DE
René van den Hof, KLM Royal Dutch Airlines, NL
SUSTAINABLE COATINGS II
9.00 am CEST
Novel laser processed riblet film for aircraft to improve fuel efficiency and CO2 emissions reduction
Dr. Takashi Yuito, Nikon, JP
Koshiro Matsui, All Nippon Airways, JP
9.30 am CEST
-online presentation-
3D Riblet Fabrication and Durability Testing
Dr. Mitchell Quinn, MicroTau, AU
10.00 am CEST
Coffee, Contacts and Exhibition
FUNCTIONAL COATINGS
10.30 am CEST
Thickness Effect on Optical Properties of Low Infrared Emitting Coating
Elif Gaye Erki, Turkish Aerospace, TR
Eylem Erdugan Ceyhan, Dyo, TR
11.30 am CEST
Antimicrobial coatings as solution to avoid microbiologically influenced corrosion (MIC) of aircraft fuel systems
Aina Cabrer Palomés, LEitaT, ES
12.00 pm CEST
Lunch and Exhibition
REPAIRS
1.00 pm CEST
Enabling Thermoplastic Composites: Advances in Practical Finish Repair Processes
Dr. Karen Schultz, Boeing, US
1.30 pm CEST
Efficient and Sustainable ways of painting, using dry paint films for drapable paint and repair patches
Gwendal Huet, Corso Magenta, FR
2.00 pm CEST
Coffee, Contacts and Exhibition
TESTING & QUALITY CONTROL
2.30 pm CEST
Aerofleet Coatings Management – a digital service to optimize coatings’ maintenance schedules
Michael Green, Akzo Nobel, US
3.00 pm CEST
Analysis and Testing of Rivet Rash Phenomena on Aircraft Fuselage
Tobias Mertens, Airbus, DE
Markus Jordan, Airbus, DE
3.30 pm CEST
Revealing the metal/coating interphase degradation by non-destructive technique based on acoustic emission
Chihab Abarkane, Amaya García, Cidetec, ES
4.00 pm CEST
Farewell and end of conference
Jan Gesthuizen, IntAIRCOAT, DE
Subject to change. Status as of May 17, 2023.